Industrial Storage // memorydepot.com

08GB SATADOM-MH 3iE iSLC 2 channel(s) TBDMB/s Built-in Power on Pin 7 DHSMH-08GD073C1DCF

SATA Disk on Module
8GB

iSLC technology : Best of both worlds: Budget friendly, more reliable, more performance than MLC flash. About 10 times more Program / Erase Cycle than MLC
Commercial Temp

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-MH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features:
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • Built-in Pin7 VCC

    • Product Informations

    Model Name: SATADOM-MH 3ME
    Interface: SATA III 6.0 Gb/s
    Type: Horizontal
    Flash Type: MLC
    Capacity: 8GB~128GB
    Max. Channels: 2
    Sequential R/W (MB/sec, max.): 300/150    		 Max. Power consumption: 2A (5V x 400mA )
    Thermal Sensor: Wide Temp. only
    H/W Write Protect: No
    Pin7 Power: Yes
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7-2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 40.0 x 30 x 9.0
    Type: Horizontal