Industrial Storage // memorydepot.com

16GB SATADOM-SH TYPE D 3SE with Pin7 VCC SLC 2 120 290 Wide Temp DESSF-16GD07SWADBF

SATA Disk on Module
16GB

Latest SATA DOM Serie SATA III interface ( Backward compatible with SATA I and SATA II )
Wide Temp Built-in Power Pin7

Innodisk SATADOM-SH 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-SH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features:
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design

    • Product Informations

    Model Name: SATADOM-SH-D-3SE-FW
    Interface: SATA III 6.0 Gb/s
    Type: Horizontal
    Flash Type: SLC
    Capacity: 1GB~32GB
    Max. Channels: 2
    Sequential R/W (MB/sec, max.): 300/130    		 Max. Power consumption: 0.6 W (5V x 130 mA )
    Thermal Sensor: Wide Temp. only
    H/W Write Protect: No
    Pin7 Power: Yes
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7-2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -55oC ~ +95oC
    Operation Temperature: Standard Grade: 0oC ~ +70oC
    Industrial Grade. OP: -40oC ~ +85oC

    Physical Characteristics

    Dimension (WxLxH/mm): 18.0 X 30.3 X 12.5
    Type: Horizontal


    Mechanical Specs