Industrial Storage // memorydepot.com

08GB SATADOM-SH 3SE Type C with Pin7 VCC DESSC-08GD07SCADBF

SATA Disk on Module
8GB

Latest SATA DOM Serie SATA III interface ( Backward compatible with SATA I and SATA II )
Commercial Temp with Pin7 VCC supported

Innodisk SATADOM-SH Type C 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. It has opposite angle compare to SATADOM-SH, and able to fulfill different motherboard (SATA port) design.

Innodisk SATADOM-SH Type C 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design

    • Product Informations

    Model Name: SATADOM-SH (Type C) 3SE F
    Interface: SATA III 6.0 Gb/s
    Type: Horizontal
    Flash Type: SLC
    Capacity: 1GB~32GB
    Max. Channels: 2
    		 Sequential R/W (MB/sec, max.): 300 / 130
    Max. Power consumption: 0.6 W (5V x 130 mA )
    Thermal Sensor: Wide Temp. only
    H/W Write Protect: No
    Pin7 Power: Yes
    Pin8 Power:
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 18.0 x 30.3 x 12.5
    Type: Horizontal

    Mechanical Specs