Industrial Storage // memorydepot.com

64GB SATADOM-MV 3SE with Pin7 VCC Supported(Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor) DESMV-64GD06AW2QBF

SATA Disk on Module
64GB

Latest SATA DOM Serie SATA III interface ( Backward compatible with SATA I and SATA II )
Wide Temp with Pin7 VCC Supported

Innodisk SATADOM-MV 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-MV 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-MV 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Write protection security
  • Zero mechanical interference
  • Anti-vibration mechanical design

    • Product Informations

    Model Name: SATADOM-MV-3SE W
    Interface: SATA III (6.0 Gbps)
    Type:
    Flash Type: SLC
    Capacity: 4GB~64GB
    Max. Channels:
    		Sequential R/W (MB/sec, max.): 130 / 120MB/s
    Max. Power consumption: 2W (5V x 400mA)
    Hardware Write Protect: No
    Pin7 Power Support: Yes (Optional)
    DRAM Buffer: No
    TRIM Yes
    ATA Security: Yes
    S.M.A.R.T: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 25.2 x 41.5 x 6.80
    Type: