![](../../../../../../../../../ssd/images/box_performance.jpg) |
Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1 Capacity:
Provide 8GB, 16GB, 32GB, 64GB within MLCs Flash ICs. |
![](../../../../../../../../../ssd/images/box_wear.jpg) |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. InnoLite SATADOM D150QV uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
![](../../../../../../../../../ssd/images/box_temperature.jpg) |
Operating Temperature RangeStandard Grade: 00C to +700C
Storage Temperature Range: -550C to +950C Relative Humidity: 10-95% , Non-Condensing
|
![](../../../../../../../../../ssd/images/box_test.jpg) |
Reliability |
Test Conditions |
Vibration |
7 Hz to 2KHz, 3 axes,
20G |
Mechanical Shock |
Duration: 0.05ms, 1500G, 3 Axes |
Product |
Condition |
MTBF(Hours) |
InnoLite SATADOM D150QV |
TELECORDIA SR-332 GB, 250C |
>3,000,000 |
|
![](/ssd/images/box_voltage.jpg) |
InnoLite SATADOM D150QV uses a standard SATA pin-out.
PIO Mode: 0~4 Ultra DMA: 0~6Serial ATA I 1.5GbpsSerial ATA II 3.0Gbps
Power Consumption |
Mode |
Power Consumption(mA) |
Read |
190 |
Write |
230 |
Idle |
140 |
|
![](/ssd/images/box_domcable.jpg) |
Power Requirement |
Item |
Symbol |
Rating |
Unit |
Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
|