Industrial Storage // memorydepot.com

8GB EDC8000 Disk on Module DOM 44pin Ultra Hi-speed wide temp DE4H-08GD91W1D

Disk on Module
8GB

Disk on Module
Wide Temp

The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This new generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment. Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application. Wide temp version -40c +85c
80MB/s Read    75MB/s Write

Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB

100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.



Model variation
Disk on Module 40pin Vertical Industrial
Disk on Module 40pin Vertical Wide temp
Disk on Module 44pin Vertical Industrial
Disk on Module 44pin Vertical Wide temp


PRICING AND PRODUCT DETAILS

Embedded DISK CARD 8000 (EDC8000) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association ATA standard. InnoDisk Embedded DISK CARD 8000 (EDC8000) is embedded solid-state data storage systems for industrial work place. Embedded DISK CARD 8000 (EDC8000) supports advanced PIO (0-4), Multi Word DMA (0-2), Ultra DMA (0-6) transfer modes, multi-sector transfers, and LBA addressing

General Specifications

Interface: IDE standard interface
Capacity:
  • SLC- 2GB~32GB
  • MLC- 4GB~64GB
    Sustained Read:     80MB/Sec
    Sustained Write:
  • SLC- 75MB/Sec
  • MLC-40MB/Sec
    Power Requirement:     +5DC +- 10% single power supply
    Error Correction Function: 8 bits/ per 512 byte
    Dimension: 58 x 25.29 x 9.1 mm (WxLxH)
    		•


    Wear Leveling

    Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. EDC8000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime


    Environmental Specifications

    Operating Temperature Range
    Standard Grade: 0°C to +70°C
    Industrial Grade: -40°C to +85°C
    Storage Temperature Range
    Standard Grade: -55°C to +95°C

    Reliabily and Durability
    Reliability Test Conditions
    Vibration: 7 Hz to 2000 Hz, 20G, 3 axes
    Mechanical Shock Duration: 0.5ms, 1500 g, 3 axes
    Product Condition MTBF (Hours): EDC8000 Telcordia SR-332 GB, 25°C > 3,000,000



    Manual CHS Value
    Capacity Cylinders Heads Sectors LBA
    2GB 3900 16 63 3931200
    4GB 7785 16 63 7847280
    8GB 15538 16 63 15662304
    16GB 16383 16 63 31293440
    32GB 16383 16 63 62,537,728