Industrial Storage // memorydepot.com

2GB EDC8000 Disk on Module DOM 40pin Ultra Hi-speed DE0H-02GD91C1D

Disk on Module
2GB

Disk on Module
Commercial Temp

The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This latest generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment. Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
80MB/s Read    75MB/s Write

Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB

100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.





PRICING AND PRODUCT DETAILS
Embedded DISK CARD 8000 (EDC8000) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association ATA standard. InnoDisk Embedded DISK CARD 8000 (EDC8000) is embedded solid-state data storage systems for industrial work place. Embedded DISK CARD 8000 (EDC8000) supports advanced PIO (0-4), Multi Word DMA (0-2), Ultra DMA (0-6) transfer modes, multi-sector transfers, and LBA addressing.

Embedded DISK CARD 8000 (EDC8000) is available in capacities ranging from 2GB to 64GB, making the upgrade path simple and fast. Available in 44-pin horizontal connector packages, EDC8000 fits into any platform with an IDE connector.
General Specifications

Interface: IDE standard interface, ATA Standard
Capacity:
  • SLC: 2GB to 32GB;
  • MLC: 4GB to 64GB
    Data transfer rate:
     􀂋Sustain Read: 80Mbytes/s. (MAX)
    􀂋Sustain Write: SLC- 75Mbytes/s (MAX); MLC-40Mbytes/s (MAX)
    Compact Design: Buil-in Power pin (pin 7) - (optional - please contact us)
    Access time: 2ms
    Error Correction Function:  Built-in ECC corrects up to 8-bit per 512-Byte
    Dimension: 60.2x27.2x9.1mm (LxWxH)
    Weight: 5g
    • Boot

    No additional device drivers are required. The EDC8000 can be configured as a boot device.
    Any Operating system can be installed.


    Electrical connection

    EDC8000 can be connected to the host by placing it directly on the on-board socket. If a cable is used, it should be no longer than 20 inches (457mm), The 40-pin EDC8000 version has a separate connector for the power supply, to which a power supply cable can be connected. In addition, pin 20 can also be used for power supply connections. Please contact us for further details.
    Wear Leveling

    Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. EDC8000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.


    Environmental Specifications

    Operating Temperature Range:
  • Standard Grade: 0°C to +70°C
  • Industrial Grade: -40°C to +85°C (SLC only)
    Storage Temperature Range: -55°C to +95°C

    		•
    Reliabily and Durability
     
     
    Reliability Test Conditions
    Vibration 40pin: 7 Hz to 2000 Hz, 15G, 3 axes
    44pin: 7 Hz to 2000 Hz, 20G, 3 axes
    Mechanical Shock 1500 G, 3 axes


    Product Condition MTBF (Hours):
    40-pin Telcordia SR-332 GB, 25°C > 3,000,000
    40-pin > 3,000,000

       
    Support Wear-Leveling Algorithm
    Support Bad Blocks Management

    Transfer mode and power consumption

    Embedded DISK CARD 8000 (EDC8000) supports the following transfer mode:
  • PIO Mode: 0~4
  • Multiword DMA: 0~2
  • Ultra DMA: 0~2



    • Manual CHS Value

     
    Capacity Cylinders Heads Sectors  LBA
    2GB 3900 16 63 3931200
    4GB 7785 16 63 7847280
    8GB 15538 16 63 15662304
    16GB 16383 16 63 31293440
    32GB 16383 16 63 62,537,728
    Accessories
    Included with all 40pin Disk on Module ( DOM ), we provide a Power Cable connecting to a Standard 4Pin Molex connector. ( Same as traditional 3.5 inch IDE Hard Disk )


    SATA DOM LOW PROFILE Disk on Module