Industrial Storage // memorydepot.com

8GB InnoLite CFast D150Q DC1T-08GJ30AC2DN

Industrial SATA CFAST Cards
8GB

CFast is based on the Serial ATA bus rather than the Parallel ATA bus. These Industrial CFAST cards have same dimension as a CF Cards but with a SATA interface. Improved, unmatched write/read performance number over the traditional CompactFlashTM Card
Commercial Temp

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well

Available in 8Gb to 64GB

InnoLite CFast D150Q supports SATA II standard (3.0Gb/s) interface with good performance and thusperforms faster data transfer rate.
InnoLite CFast D150Q is suitable in industrial field. It effectively reduces the booting time of operation systemand the power consumption is less than hard disk drive (HDD). InnoLite CFast D150Q can work under harsh environment. InnoLite CFast D150Q complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

PRICING AND PRODUCT DETAILS
Wear Leveling
Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. Innolite-CFASTD150Q uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Environmental Specifications
Operating Temperature Range
  • Standard Grade: 00C to +700C
  • Industrial Grade: -550C to +950C
     Storage Temperature Range: -550C to +950C
     Relative Humidity: 10-95% , Non-Condensing
    		•

    Reliabily and Durability

     Reliability

     Test Conditions
    Vibration 7 Hz to 2KHz, 5G,    3 axes, 20G
    Mechanical Shock Duration: 0.05ms, 1500G, 3 Axes
     
    Product Condition MTBF(Hours)
    Innolite-CFASTD150Q TELECORDIA SR-332 GB, 250C >4,000,000

    Transfer mode and Power consumption
    Innolite-CFASTD150Q uses a standard SATA pin-out.
  • PIO Mode: 0~4
  • Ultra DMA: 0~6
  • Serial ATA I 1.5Gbps
  • Serial ATA II 3.0Gbps

    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 140


    • Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V

    Mechanical Specification

    Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1
    Capacity: Provide 8GB, 16GB, 32GB, 64GB within MLCs