Industrial Storage // memorydepot.com

256GB InnoRobust 2.5" PATA SSD IDE 44pin Wide Temp D2D9-B56J21AWBES

IDE Solid State Flash Disk
256GB

Industrial Laptop Size 2.5 44pin IDE PATA Solid State disk. Extremly reliable based on Industrial Chips for Industrial / Embedded Applications
Wide Temp



Compliant with MIL-STD-810-F/G
Data security
iCell technology for data protection
Excellent data transfer speed
TRIM command set supported
Thermal sensor supported
Conformal coating (optional)

InnoRobust SSD provide high capacity 2.5-inch solid-state flash disk that electrically complies withATA 7 standard, and supports Ultra DMA (0-5) and PIO (0-4) transfer modes. Particularly InnoDisk hasdedicated to develop own firmware which enhances small file transfer rate. Regarding performance of InnoRobust SSD, sustained read is 75 MB per second (max.), and sustained write is 50 MB per second (max), in terms of 4 KB IOPS, random read is up to 2250, random write is up to 85.

InnoRobust SSD is designed for industrial field. The SSD have good performance, no latency time and small seek time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoRobust SSD can work in harsh environment. It is vibration resistance, and can work in lower or higher temperature than HDD. InnoRobust SSD complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
 

PRICING AND PRODUCT DETAILS
Mechanical Specification
Dimension(WxLxH) 20.8mm x 32.8mm x 8.0mm

Wear Leveling
Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoRobust SATA SSD uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Environmental Specifications
Attitude  80,000ft
Operating Temperature Standard Grade: 00C to +700C
Industrial Grade: -400C to +850C
Storage Temperature -550C to +950C
Shock(Operating) 1500G
Vibration(Operarting) 20G
Humidity 5-95%,non-condensing
Conformal Coating Optional
Write Protect Support
DATA Retention 10 Years

Reliabily and Durability

 Reliability

 Test Conditions
Vibration 7 Hz to 2KHz, 5G,    3 axes, 20G
Mechanical Shock Duration: 0.05ms, 1500G, 3 Axes
 
Product Condition MTBF(Hours)
 InnoRobust SATA SSD TELECORDIA SR-332 GB, 250C >4,000,000

Transfer mode and Power consumption
Power Consumption Mode Power Consumption(mA)
Read 190
Write 230
Idle 140

Electrical Specification
Power Requirement Item Symbol Rating Unit
Input voltage VIN +5DC +-5% 500mA(max.) V