Industrial Storage // memorydepot.com

4GB InnoLite II 1.8 SATA SSD D1ST2-04GJ30AW1SN

4GB


Wide Temp

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well

Available in 4gb to 32GB

InnoLite II 1.8 SATA SSD is standard 7+15 pin SATA interface could support most of the platform with standard SATA port. InnoLite II 1.8 SATA SSD operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 120/40MB per second (max).

InnoLite II 1.8 SATA SSD is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoLite II 1.8 SATA SSD complies with ATA protocol, no additional drivers are required, and the INNOLITE II 1.8 SATA SSD can be configured as a boot device or data storage device.

PRICING AND PRODUCT DETAILS
General Specifications

Connector Type   Standard 7+15 Pin SATA Connector
Flash Type MLC(Single Level Cell)
Density 4GB,8GB,16GB,32GB
Transfer Mode SATA II 3.0 Gb
 
Sustained R/W Performance Read: 110 MB/sec(max.)
Write: 50 MB/sec(max.)

Environmental Specifications
DC Input  +5V DC 5%
Power Consumption(Max.) Read: 190 mA
Write: 230 mA
Idle: 140mA
Operating Temp. 00C-+700C(Standard Grade)
Storage Temp. -550C-+950C
Humidity Relative Humidity: 10-95%,non-condesing
Flash Endurance 3,000 program/erase cycles
MTBF >3,000,000 hours
Certification CE,FCC,RoHS
Warranty 2 years

Mechanical Specifications
Dimension(WxLxH) 69.85mm x 50.0mm x 9.0mm
Weight 57 5g
Vibration 20G, 7 Hz to 2K Hz, , 3 axes
Shock 1500G, Duration:10ms,  axes