|
Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1 Capacity:
Provide 16GB, 32GB,64 GB within MLCs Flash ICs.
Performance (quad channel):
Read- 90 MB/sec. (max.)
Write- 30 MB/sec. (max.)
|
|
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device.
InnoLite CFast D150Qw uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
|
Operating Temperature RangeStandard Grade: 0innolite-sataslimD150QwC to +70innolite-sataslimD150QwC
Storage Temperature Range: -55innolite-sataslimD150QwC to +95innolite-sataslimD150QwC Relative Humidity: 10-95% , Non-Condensing |
|
Reliability |
Test Conditions |
Reference Standards |
Vibration |
7 Hz to 2KHz, 5G, 3 axes |
IEC 68-2-6 |
Mechanical Shock |
Duration: 10ms, 50G, 3 Axes |
IEC 68-2-27 |
Product |
Condition |
MTBF(Hours) |
InnoLite CFast D150Qw |
TELECORDIA SR-332 GB, 250C |
>3,000,000 |
|
|
InnoLite CFast D150Qwuses a standard SATA pin-out. See List forInnoLite CFast
D150Qw pin assignments.
PIO Mode: 0~4 Ultra DMA: 0~6Serial ATA I 1.5GbpsSerial ATA II 3.0Gbps
Power Consumption |
Mode |
Power Consumption(mA) |
Read |
190 |
Write |
230 |
Idle |
140 |
|
|
Power Requirement |
Item |
Symbol |
Rating |
Unit |
Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
|