Industrial Storage // memorydepot.com

128GB PCIe SSD Matador (SLC) CP2L-A28J20C1

PCIE Disk on Module
128GB


Commercial Temp

InnoDisk Matador II products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with PCIe G1standard interface.

InnoDisk Matador II supports PCIe G1 (2.5G/lan) with high performance. For SLC solution, sustain read is at 910 MB per second (max.), and sustain write is at 750 MB per second (max).

InnoDisk Matador II uses standard PCIe G1 X8 interface with the PCIe full height form factor, which can be used in laptop. The Matador II has good performance, short latency time and small seek time.

It effectively reduces the transfer time of large stream data and the power consumption is less than he Raid system with hard Disk Drive. InnoDisk Matador II can be installed easily by including a device driver for OS. InnoDisk Matador II complies with ATA protocol, and the Matador II SSD can be configured as a boot device or data storage device.

Available in 64GB to 512GB

Features:
  • Support maximum 16CEs Flash per channel.
  • Support 5x/4x/3x nm Flash.
  • Enhanced endurance by dynamic/static wear-leveling.
  • Supports 4K/8K bytes page size.
  • Supports dynamic power management.
  • SMART (Self-Monitoring, Analysis and Reporting Technology).
  • Data integrity under power-cycling.
  • Supports 8 bits Flash interface.
  • Supports BCH 16/24 bits ECC.
  • Support NCQ on this controller.
  • Support LBA24 & LBA48 on this controller.
  • Support 1 to 8 banks selected free.
  • Support 2 to 8 channels selected free.

    • General Specifications
    InnoDisk Matador II uses the PCIe interface, and it is compliant with PCIe specification ver. 1.1 and can work with PCIe Gen. 1 X8 or above host system, which is used in server computer. InnoDisk Matador II is compliant with PCIe Gen 1 specification (Gen 1 supports 2.5Gbps per lan data rate). A standard PCIe X8 edge-finger definition is used on Matador II. PCI Express is a serial interface. A PCI Express link is the physical connection of two PCI Express devices. A PCI Express lane contains both the transmit and receive signal pairs in a link. An x1 link contains one PCI Express lane, whereas an x8 link contains eight PCI Express lanes. The Raid controller supports x8 links. The PCI Express interface expands upon and adds to the features offered in conventional PCI. More information on any of these features is available in the PCI Express specification.
    Matador II form factor Matador II form factor design with metal material case is easy for installation because PCIe is a popular form factor. InnoDisk Matador II has a compact design with the dimension of 171.25 mm x 89.30 mm x 17.90 mm.
    InnoDisk Matador II provides unformatted 64GB, 128GB and 256GB capacities within SLC flash ICs and 128GB, 256GB and 512GB capacities within MLC flash ICs

    Environmental Specifications
    Operating Temperature Range:
  • Standard Grade: 00C to +700C (available currently)
  • Industrial Grade: -400C to +850C(under development)
     Storage Temperature Range:
  • Standard Grade: -550C to +950C
  • Industrial Grade: -550C to +950C
     Relative Humidity: 10-95% , Non-Condensing
    		•

    Reliabily and Durability

     

    		 Reliability

     Test Conditions
    Without Package Vibration 5 Hz to 500Hz, 2G, 3 axes
    Mechanical Shock Duration: 6ms, 100G, 3 Axes
    With Package Drop 96cm
    Vibration 1.14G rms, 1-800Hz
     
    Product Condition MTBF(Hours)
    InnoDisk Matador II PCIe SSD TELECORDIA SR-332 GB, 250C >4,000,000

    Transfer mode
    InnoDisk Matador II PCIe SSD support following transfer mode: PCIe Gen. 1 X8

    Performance
    Sequential read: SLC: 910MB/s
    MLC: 700MB/s
    Sequential write: SLC: 750MB/s
    MLC: 530MB/s
    Random read: 450MB/s (Test By Everest)
    Random Write: 350MB/s (Test By Everest)

    Wear Leveling
    Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoDisk Matador II uses a static wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page/block in the flash. This spreads flash media usage evenly across all pages, thereby extending flash lifetime.

    Bad Block Management
    Bad Blocks are blocks that contain one or more invalid bits whose reliability are not guaranteed. The Bad Blocks may be presented while the SSD is shipped, or may develop during the life time of the SSD. The Bad Blocks will not exceed more than 6.7% of the total device volume. When the Bad Blocks is detected, it will be flagged, and not be used anymore. The SSD implement Bad Blocks management, Bad Blocks replacement, Error Correct Code to avoid data error occurred. The functions will be enabled automatically to transfer data from Bad Blocks to spare blocks, and correct error bit. After the reserved block under 40, the SSD will be locked, and the SSD cannot be written anymore. Host can send a vendor ATA command to unlock the SSD for backup data or system from SSD.