Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000 (end of life)

InnoDisk FiD 2.5 SATA 6000 products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5 SATA 6000 support SATA II standard (3.0GHz) with high performance. Sustain read is 60 MB per second, and sustain write is 40 MB per second. InnoDisk FiD 2.5 SATA 6000 uses standard 2.5-inch form factor, which can be used in laptop. InnoDisk FiD 2.5 SATA 6000 is also designed for industrial field. The SSD have good performance, and have small latency time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5 SATA 6000 can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoDisk FiD 2.5 SATA 6000 complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

Burst Transfer Rate : 3Gbps Sustained Read : 60MB/sec Sustained Write : 40MB/sec Average Latency : 0.4 ms DC Input Voltage: +3.3V/+5V Single power supply Dimension: 99.83/69.63/9.3 mm (W/T/H) Compatibility: CE  and FCC standards

No additional device drivers are required. Flash in Disk (FiD) 2.5 SATA 6000 can be configured as a boot device.

Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoDisk FiD 2.5 SATA 6000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page/block in the flash. This spreads flash media usage evenly across all pages, thereby extending flash lifetime.

Operating Temperature Range Standard Grade: -100C ~ +700C Industrial Grade: -400C ~ +850C Storage Temperature Range Standard Grade: -550C to +950C

Reliability Test Conditions Vibration: 7 Hz to 2000Hz, 2 g, 3 axes Mechanical Shock Duration: 0.5ms, 1500 g, 3 axes Drop Unit: From a height of 1.5 m Product Condition MTBF (Hours): FiD 2.5 SATA6000 Telcordia SR-332 GB, 25 0CC > 3,000,000

(end of life)  2.5 SATA 10000 Hi-Speed Solid State Flash Disk (end of life)  2.5 SATA 10000 Hi-Speed Solid State Flash Disk MLC (end of life)  2.5 SATA 10000 Hi-Speed Solid State Flash Disk Wide Temp (end of life)  CF SATA Industrial ( Innolite )  CF SATA Industrial WIde Temp ( Innolite )  CFAST Card (end of life)  Commercial MLC Solid State Disk SATA SSD (end of life)  Disk on Module DOM SATA Hi-Speed Horizontal i-150  Disk on Module DOM SATA Hi-Speed Horizontal i-150 Wide Temp  Disk on Module DOM SATA Hi-Speed Vertical i-150  Disk on Module DOM SATA Hi-Speed Vertical i-150 Wide Temp  Disk on Module Hi-Speed DOM EDC4000 IDE 40Pin Vertical ( end of life )  Disk on Module Hi-Speed DOM EDC8000 IDE 40Pin Vertical  Disk on Module Hi-Speed DOM EDC8000 IDE 40Pin Vertical Wide temp  Disk on Module Hi-Speed DOM EDC8000 IDE 44pin Vertical  Disk on Module Hi-Speed DOM EDC8000 IDE 44pin Vertical Wide temp  Disk on Module Innolite IDE 40Pin Vertical  Disk on Module Innolite IDE 40Pin Vertical Wide Temp  Disk on Module Innolite IDE 44Pin Vertical  Disk on Module Innolite IDE 44Pin Vertical Wide Temp  EOL Products  IDE Solid State Flash Disk ATA4000 (end of life)  Industrial Compact Flash Hi-Speed ICF8000 (end of life)  Industrial Compact Flash Hi-Speed ICF8000 (end of life)  Industrial Compact Flash Hi-Speed ICF8000 Wide Temp (end of life )  Industrial Compact Flash Hi-Speed ICF8000 wide temp (end of life)  Industrial Compact Flash Hi-Speed ICF8000 Wide Temp with Write Protection Switch (end of life)  Industrial Compact Flash Hi-Speed ICF8000 with Write Protection Switch (end of life)  Industrial CompactFlash (end of life )  Industrial CompactFlash (end of life)  Industrial CompactFlash(end of life)  Industrial SATA Storage Card CFAST 100 (end of life)  Industrial SLC Solid State Disk ATA SSD (end of life)  Industrial SLC Solid State Disk ATA SSD (end of life)  Industrial SLC Solid State Disk ATA SSD (end of life)  Industrial SLC Solid State Disk SATA SSD (end of life)  Industrial SLC Solid State Disk SATA SSD (end of life)  Industrial SLC Solid State Disk SATA SSD (end of life)  Industrial SLC Solid State Disk SATA SSD (end of life)  InnoLite II 1.8'' SATA SSD (Phasing out)  InnoLite II 1.8'' SATA SSD Wide Temp (Phasing out)  SATA Disk on Module (end of life  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  SATA Disk on Module (end of life)  Solid State Disk SATA Slim  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000 (end of life)  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000 Wide Temp (end of life)

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: