|
 Mini PCIeDOM 1IE3
Product Features
Enhanced endurance with iSLC
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
Mini PCIeDOM 1ME3
Product Features
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
MiniDOM-U 2ME
The Innodisk MiniDOM-U product provides high capacity Mini PCIe memory storage with USB interface, which electrically complies with High-speed USB 2.0 interface & backward compatible with USB 1.1. The device features attractive small form factor and the connectivity with USB 2.0 interface and the NAND flash architecture provides a faster data transmission.
Cost-effective MLC
Work on mini PCIe interface with USB signal
Wear-leveling supported
Low power consumption
|
|
|
MiniPCIe DOM 1ME3
Innodisk Mini PCIeDOM 1ME is a Flash based disk module with Mini PCI Express interface, which brings you new generation of storage solution, especially focused on embedded systems. It not only provide standard Mini PCIe interface but also delivers excellent performance.
Comparing with most Mini PCIe storage devices in the market, Mini PCIeDOM 1ME comes
with standard Mini PCI Express interface, just plug and play without any circuit modification, and no driver needed, which is the easiest way for board maker or system integrator to
design in the product as a boot drive or storage device.
Features:
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
Mini PCIe Disk on Module (PCIe 1.1 compatible)
The Mini PCIe Disk on Module (mini DOM) series supports SATA II standard
(3.0Gb/s) and USB 2.0 interface with good performance and thus performs faster data
transfer rate. Sustain read can reach up to 100MB per second (max), and sustain
write reach up to 60MB per second (max). Moreover, InnoDisk mini DOM is designed
as the standard Mini PCIe form factor, and compatible with Mini PCIe slot
|
|
|
Mini PCIe Disk on Module (SATA & USB 2.0 compatible)
PCI Express has been adopted as a mainstream interface of storage, which dramatically
increases data transfer bandwidth and application performance; Besides, Mini PCI Express
also been applied in most of IPC system.
InnoDisk Mini PCIeDOM is a revolutionary innovation of disk on module with Mini PCIe
Express interface, which brings you new generation of storage solution, especially focused
on embedded systems.
Comparing with most Mini PCIe storage devices in the market, Mini PCIeDOM comes with
standard Mini PCI Express pin definition, for board maker or system integrator is the easiest
way to design in this product without any circuit modification.
|
|
|
Mini PCIe Disk on Module (USB 2.0 Compatible)
PCI Express has been adopted as a mainstream interface of storage, which
dramatically increases data transfer bandwidth and application performance;
Besides, Mini PCI Express
also been applied in most of IPC system. InnoDisk Mini PCIeDOM is a
revolutionary innovation of disk on module with Mini PCIe Express interface,
which brings you new generation of storage solution, especially focused on
embedded systems. Comparing with most Mini PCIe storage devices in the market,
Mini PCIeDOM comes with
standard Mini PCI Express pin definition, for board maker or system integrator
is the easiest way to design in this product without any circuit modification.
|
|
|
Mini PCIeDOM 1SE, SLC
The InnoDisk Mini PCIeDOM 1SE (SLC) is a flash based disk module with Mini PCI Express interface, which brings you new generation of storage solution, especially focused on embedded systems. It not only provide standard Mini PCIe interface but also delivers excellent performance.
Comparing with most Mini PCIe storage devices in the market, Mini PCIe DOM 1SE comes with standard PCI Express interface, just plug and play without any circuit modification, and no driver needed, which is the easiest way for board maker or system integrator to design in the product as a boot drive or storage device.
Features
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
MinoDOM-U 2SE SLC
The Innodisk MiniDOM-U product provides high capacity Mini PCIe
memory storage with USB interface, which electrically complies with Highspeed
USB 2.0 interface & backward compatible with USB 1.1. The device
features attractive small form factor and the connectivity with USB 2.0
interface and the NAND flash architecture provides a faster data
transmission.
|
|
|
PCIe Disk on Module
The PCIe DOM is a totally revolutionary embedded flash storage. It is developed within amazing data transfer speed and also extremely small mechanical design. PCIeDOM has a height of 2 cm, which avoids mechanical interference with easy installment on the flat mother board. Different from the connection with a tailgate of the system for installation, PCIeDOMTMs patented mechanical design lets users to enjoy simple installment and detachment without other tools, just plug and play.
Besides, PCIeDOM provides excellent random read/write performance and support intelligent wear-leveling algorithm to assure the reliability of the device.
Smallest PCIe Disk on Module
Compliant with PCIe x1, and compatible with PCIe x4, x8, x16
Excellent IOPS
Built-in ECC function
Support wear-leveling algorithm
Patented mechanical design-plug and play: anti-shock and anti-vibration
Flexibility for server mother board design (without tailgate)
|
|
|
PCIe G1 SSD 910MB/s Matador
InnoDisk Matador II products provide high capacity flash memory Solid State Drive (SSD)
that electrically complies with PCIe G1standard interface.
InnoDisk Matador II supports PCIe G1 (2.5G/lan) with high performance. For SLC solution, sustain read is at 910 MB per
second (max.), and sustain write is at 750 MB per second (max).
InnoDisk Matador II uses
standard PCIe G1 X8 interface with the PCIe full height form factor, which can be used in
laptop. The Matador II has good performance, short latency time and small seek time.
It
effectively reduces the transfer time of large stream data and the power consumption is less
than he Raid system with hard Disk Drive. InnoDisk Matador II can be installed easily by
including a device driver for OS. InnoDisk Matador II complies with ATA protocol, and the
Matador II SSD can be configured as a boot device or data storage device.Available in
64GB to 512GB
Features:
Support maximum 16CEs Flash per channel.
Support 5x/4x/3x nm Flash.
Enhanced endurance by dynamic/static wear-leveling.
Supports 4K/8K bytes page size.
Supports dynamic power management.
SMART (Self-Monitoring, Analysis and Reporting Technology).
Data integrity under power-cycling.
Supports 8 bits Flash interface.
Supports BCH 16/24 bits ECC.
Support NCQ on this controller.
Support LBA24 & LBA48 on this controller.
Support 1 to 8 banks selected free.
Support 2 to 8 channels selected free.
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
